MPEG LA MPEG4 Bedienungsanleitung PDF herunterladen (Seite 53)

REMOTE OPERATION

~49~

Function Description

Device Type Choose either normal camera or PTZ camera.

ID No. Set the ID number (0 ~ 255) of the connected PTZ camera.

Protocol Type Choose “NORMAL” or “P-D” protocol. It is recommended to select PELCO-D protocol for the

connected PTZ camera of other brands. Please choose Normal if it’s our own PTZ camera

Baud Rate Set the baud rate of each channel (2400 / 4800 / 9600 / 19200 / 38400 / 57600 / 115200).

 Detection

Select the desired channel, and click “Edit” to enter the motion detection sensitivity and area-setting page.

Please see the description below for each function:

Function Description

DETECT Enable (ON) or disable (OFF) the function of “Motion Detection”.

If this function is enabled, you might need to set the motion detection sensitivity or simply keep the

default values. For details, please see the description below.

Motion Detection

Sensitivity

(LS / SS / TS / RE)

Set the detection sensitivity in 4 different adjustable parameters (LS / SS / TS / RE). For details

about each parameter, please refer to “7.1.2 Detection” at page 21.

Alarm Select N.C. (normal closed) / N.O. (normal opened) / OFF for the alarm polarity. For N.C. / N.O.

contact details, please refer to “APPENDIX 2”.

Motion Detection

Setting Area

Set the motion detection area by selecting the area grids with your mouse. Pink grids represent

the area that is not being detected while the transparent grids are the area under detection. You

can set multiple areas under detection.

Click “－” (Clear All) to set the whole area undetected.

Click “＋” (Select All) to set the whole area under detection.

Apply / Return To save the setting, click “Apply” and return to “Dvr Setting” window.

To discard the setting, click “Return” to directly return to “Dvr Setting” window without saving.

 Record

In “Dvr” → “Record”, you will see the following items for DVR record settings.

1 2 ... 48 49 50 51 52 53 54 55 56 57 58 ... 72 73

Keine Kommentare

MPEG LA MPEG4 Bedienungsanleitung Seite 53