MPEG LA MPEG4 Bedienungsanleitung PDF herunterladen (Seite 45)

REMOTE OPERATION

~41~

Function Description

IP Address / Port / User Name / Password Check if the network connection information of the DVR within which

contains the video data you need is correct.

HDD Number / Channel Specify the hard disk (HDD Number) and channel number (Channel)

within which have the video data you need.

Download by Time Specify the time range within which has the video data you want in the

“Start Time” and “End Time” columns.

Download by Event Select an event log from the event list. This list shows all logs in the

specified DVR from the latest to the earliest.

‧To quickly find the events you need, check or uncheck the event type

“System” / “Manual” / “Alarm” / “Motion”, and select the log you want.

‧To view the earlier or later logs that are not shown in the current page,

click “Prev. Page” or “Next Page”.

‧To refresh the event list, click “Reload”.

File Path Assign the location where the backup files are saved.

Simultaneous Playback To view the backup images simultaneously when the download process

is in progress, select Simultaneous Playback.

You will see the backup images while the images are being downloaded

to the PC or notebook.

To simply backup images without previewing, deselect Simultaneous

Playback. You will only see a message box indicating the total time

needed, the current status and the saving location.

Download / Cancel Click “Download” to start or “Cancel” to discard the video backup.

Click “ ” to go into the “Record Setting” page and you can set the following items:

‧Record type

‧Hard disk overwriting

‧Pre- / post-alarm record time

‧Record time setting

‧Record path

Record type

In this section, you can select which type of the recording will be enabled. There are 4 options: Manual /

Schedule / Motion / Alarm.

Hard disk overwriting

To overwrite the recorded data from the earliest to the latest when the hard disk is full, check “Hard Disk

Overwrite” checkbox.

Pre- / post-alarm record time

Select the pre-/post-alarm recording time from 0 sec. to 10 sec.

Record time setting

There are two ways to set the record time: Weekly and Custom.

1 2 ... 40 41 42 43 44 45 46 47 48 49 50 ... 72 73

Keine Kommentare

MPEG LA MPEG4 Bedienungsanleitung Seite 45