MPEG LA 16CH Bedienungsanleitung PDF herunterladen (Seite 203)

- 3 -

Then click “Server Setting” on the miscellaneous control panel.

Click “Network” in the tree path on the left of the server setting interface.

3 network connection types are available: Static IP, PPPOE and DHCP.

If you have a static IP address obtained from the local ISP, you can set the “IP Type” as

“Static IP”. Otherwise, apply for a DDNS account to appoint a fixed domain name for the

dynamic IP address, and then set the “IP Type” as “PPPoE” or “DHCP”.

2.1 Static IP

Set the “IP Type” as “Static IP”. Enter “Server IP”, “Gateway”, “Net Mask” and “Web Port”

(1~9999) information obtained from your ISP. Then, click “Apply” to confirm.

Connect your DVR to the Internet via a network device (hub or switch). Your DVR will log

into the Internet automatically via the IP address you just entered, and you can use this IP

address to visit your DVR remotely.

Note: Please make sure you have applied for a static public IP address from the

local ISP before using this function.

2.2 DDNS Account

Under the connection of PPPoE or DHCP, you could key in the domain name which points

to the IP address of you DVR to login. However, you need apply for a DDNS account at

first.

1 2 ... 198 199 200 201 202 203 204 205 206 207 208 ... 211 212

Keine Kommentare

MPEG LA 16CH Bedienungsanleitung Seite 203