MPEG LA 16CH Bedienungsanleitung Seite 15

  • Herunterladen
  • Zu meinen Handbüchern hinzufügen
  • Drucken
  • Seite
    / 84
  • Inhaltsverzeichnis
  • FEHLERBEHEBUNG
  • LESEZEICHEN
  • Bewertet. / 5. Basierend auf Kundenbewertungen
Seitenansicht 14
CONNECTIONS AND SETUP
-11-
3.2 Camera Connection
The cameras must be connected and power-supplied before the DVR is turned on. Connect the camera with the
indicated power supply. And then connect the camera video output to the DVR video input port with a coaxial cable or
RCA lines with BNC connectors (The DVR will automatically detect the video system of the camera).
3.2.1 Normal Camera Connection
1) Power connection:
Connect the camera with indicated power supply.
2) Video cable connection:
Connect the camera video output to the DVR video input port with a coaxial cable or RCA line with BNC
connector.
3) Camera Setup:
For detailed camera title, ID, protocol and baud rate setup, please refer to “7.1.7 Remote” at page 34.
3.2.2 PTZ Camera Connection
4) Power connection:
Connect the PTZ camera with indicated power supply.
5) Video cable connection:
Connect the PTZ camera video output to the DVR video input with a coaxial cable / RCA line and BNC connector.
6) RS485-A & RS485-B wires connection:
For 4CH DVR Model:
Solder the RS485-A (brown) and RS485-B (orange) wires of the PTZ camera to the corresponding pins on the
solder side of the 15 PIN D-Sub connector (see the figure below). To protect the naked wires, use the insulation
tape to cover on the twisted wires.
For 16CH & 8CH DVR Model:
Insert the RS485-A (brown) and RS485-B (orange) wires of the PTZ camera to the corresponding pins on the
“RS485” port of the DVR rear panel (see the figure below).
PTZ Camera –
RS485-A and RS485-B wires of the PTZ
camera
For 4CH DVR –
15 PIN D-Sub Connector
For 16CH & 8CH DVR –
RS-485 Port on the DVR Rear
Panel
RS485-A: Brown wire RS485-A: PIN 11 RS485-A: PIN 2
RS485-B: Orange wire RS485-B: PIN 10 RS485-B: PIN 3
Solder Side of
15-pin D-Sub connector
RS485-A: PIN11; RS485-B: PIN10
1
912131415
16 17
2345678
1011
7) Camera Setup:
For detailed camera title, ID, protocol and baud rate setup, please refer to “7.1.7 Remote” at page 34.
Note: For connect the PTZ camera to the DVR with a keyboard controller, please refer to “3.3.3 Connect
PTZ Camera and DVR with Keyboard Controller” at page 13.
Seitenansicht 14
1 2 ... 10 11 12 13 14 15 16 17 18 19 20 ... 83 84

Kommentare zu diesen Handbüchern

Keine Kommentare